Page 1 of 6
Rev6 New Login tutorial [Not a hack, No Program Req]
Posted: Sun Jul 19, 2009 8:21 am
by Kubijo
http://www.rev6.com/loginTutorial.txtFrom rev6 front page news section
Figured this might be useful to everyone who aren't using premium.
At least for the time it work.
It a copy/paste from their forum exploit section.
They explain why it can take up to 12 hours and what to do to prevent such a thing from happening.
You can do this legitly, no need to cheat.
This is for legit player to login faster.
It is based on multiple test compiled in the last 24 hours.
This entire tutorial might not be working,
it is for you to decide if it work or not.
There is 4 login server
121.128.133.26:15779
121.128.133.27:15779
121.128.133.28:15779
121.128.133.29:15779
Reason behind why this method work:
When you are on Silkroad online and you type your account name and password, sro_client.exe connect to 1 of those 4 servers randomely.
The server .26 and .27 are the oldest login server.
The server .28 and .29 are the newer login server added recently.
The new login system is in fact a
QUEUE LIST SYSTEM!You will claim it is not, I am not here to argue, both rev6 and other programmer has confirmed that even though it send a connect to server packet each 20 seconds, it is still a queue list system.
The issue is that all the gold bot and clientless bot only use the server .26 and .27 and haven't been updated to use the newer server .28 and .29
In fact most of the clientless only connect to the server .26
Each server has their own queue list system:
.26 --> queue list 1 (extremely long) [gold bot clientless]
.27 --> queue list 2 (really long) [some clientless and old bot]
.28 --> queue list 3 (really short) [legit user + few bot]
.29 --> queue list 4 (really short) [legit user + few bot]
Now test it for yourself, when you connect to silkroad, you can follow the tutorial and figure out on which of the 4 login server you are connected to.
If you are connected to the server .26 it will take up sometime even more than 12 hours to connect. The server .27 is the same but a bit least depending on which server it is.
Which is why you never want to be in a queue list with gold bot or to be more precise .26 and .27
This should work for a while, no idea if gold bot will update their client and make the login awfull on each server.
If you are connected to the server .28 or .29, you will in general login within 30 minutes. In other word, when you open silkroad and before you type your password do the following:
Step 1
click on Start / Program / Accessories / Command prompt
OR
Click on start / run / Type cmd
Step 2 You have a Black command prompt open [opened from Step #1]
Step 3 Silkroad is open at the login server
Type in the black console: netstat -n
Type enter after and some big listing will appear of all your connection
Search for either of those server in the 3rd column [Foreign Address]
121.128.133.26:15779
121.128.133.27:15779
121.128.133.28:15779
121.128.133.29:15779
If you are on the server 26 or 27, close silkroad and reopen to the login server.
If you are on the server 28 or 29, type in your account name and password.
Click connect and wait.
There is also other way like modifying your hosts files to only connect to the server .29
By adding those line:
121.128.133.29 gwgt1.joymax.com
121.128.133.29 gwgt2.joymax.com
121.128.133.29 gwgt3.joymax.com
To the file 'C:\Windows\System32\drivers\etc\hosts'
Which isn't recommanded if you do not know what your doing.
Please note if you can't save the file, it because hosts is in read only mode, find the file, go in properties and remove the read only checkmark
Please note if the login server .29 crash, your silkroad will never try to connect to any of the other 3 login server, so if that happen, you need to erase those 3 line to open silkroad and be able to login to a server other than the server .29 (the server .28 crashed a few times this week)
Re: Rev6 New Login tutorial [Not a hack, No Program Req]
Posted: Sun Jul 19, 2009 8:33 am
by M3K0S
wow NICE...
i got in and it gave me .65 the last number... but i was already logged in lol
Re: Rev6 New Login tutorial [Not a hack, No Program Req]
Posted: Sun Jul 19, 2009 8:33 am
by Cepiii
Has anyone tried it? Does it really work?
Re: Rev6 New Login tutorial [Not a hack, No Program Req]
Posted: Sun Jul 19, 2009 8:37 am
by CloudStrider
Seems niiiiiice.
Re: Rev6 New Login tutorial [Not a hack, No Program Req]
Posted: Sun Jul 19, 2009 8:39 am
by NuclearSilo
lol
At least there's one real good thread in this week.
Deserve a thank button
Re: Rev6 New Login tutorial [Not a hack, No Program Req]
Posted: Sun Jul 19, 2009 8:41 am
by Kubijo
M3K0S wrote:wow NICE...
i got in and it gave me .65 the last number... but i was already logged in lol
.65 is the game server and .26 to .29 is the login server
There is a different ip for each game server, and each game server has multiple ip 2-3 ip each. Which sometime your server dies but you stay in the server, since 1 of the 2 ip crashed and your server is in check mode, and you are still in the server. Basically when that happen, half of the server got disconnected. Though recently when such a thing happen, they disconnect the other ip of the server about 5 min later and do a full restart of the server to prevent the server capacity to have invalid # of players.
I got that information from a brother of a friend of a friend, who used to know a gm named tarky.
Re: Rev6 New Login tutorial [Not a hack, No Program Req]
Posted: Sun Jul 19, 2009 8:45 am
by KylieMinogue
M3K0S wrote:wow NICE...
i got in and it gave me .65 the last number... but i was already logged in lol
yeah i didn't see 26-29 at all
Re: Rev6 New Login tutorial [Not a hack, No Program Req]
Posted: Sun Jul 19, 2009 8:48 am
by CloudStrider
Probably you were on the game server? Like Kub just said.
Re: Rev6 New Login tutorial [Not a hack, No Program Req]
Posted: Sun Jul 19, 2009 8:50 am
by Kubijo
They way they prooved that it was a queue system is by login to the server .26 which has the biggest queue list + a tool to get the amount of player on each server with a refresh rate of 500 ms. As soon as there 3498/3500 player, they click on connect to send the first connect to the server. The test has been done multiple time and in fact never once it has connected and the server was 3498/3500 before and after the packet was sent to login.
From there, they realized by deduction the rest that is in the post in here.
Just a logical deduction that could be false.
Which is also why now the server capacity on rev6 show a server that is 3498/3500 as full... Actually I won't go in detail because I didn't fully understood why, but it was causing wrong PoC % value with the new system.
Re: Rev6 New Login tutorial [Not a hack, No Program Req]
Posted: Sun Jul 19, 2009 8:50 am
by KylieMinogue
also how can i tell which one I'm established on? or connected to?
Re: Rev6 New Login tutorial [Not a hack, No Program Req]
Posted: Sun Jul 19, 2009 8:56 am
by CloudStrider
KylieMinogue wrote:also how can i tell which one I'm established on? or connected to?
Have SRO open, open up cmd, type in nstat- (wrong command, just check it on the OP).
Now press enter, a list will appear, it consists of all your connections.
Look for one of those IP's.
Re: Rev6 New Login tutorial [Not a hack, No Program Req]
Posted: Sun Jul 19, 2009 8:56 am
by KylieMinogue
i constantly get 26
Re: Rev6 New Login tutorial [Not a hack, No Program Req]
Posted: Sun Jul 19, 2009 8:58 am
by CloudStrider
KylieMinogue wrote:i constantly get 26
Change your host files.
Re: Rev6 New Login tutorial [Not a hack, No Program Req]
Posted: Sun Jul 19, 2009 9:01 am
by KylieMinogue
mine friend's pc its called
hosts1.bak
hosts.ics
Re: Rev6 New Login tutorial [Not a hack, No Program Req]
Posted: Sun Jul 19, 2009 9:05 am
by KylieMinogue
okay i got on 29, now it's 4mins after the hour, i'll post my results.
can someone explain why it's called
hosts1.bak
hosts.ics
on my friend's pc?
Re: Rev6 New Login tutorial [Not a hack, No Program Req]
Posted: Sun Jul 19, 2009 9:06 am
by reLaxx`
So far, I have only gotten 26.
Re: Rev6 New Login tutorial [Not a hack, No Program Req]
Posted: Sun Jul 19, 2009 9:06 am
by KylieMinogue
CloudStrider wrote:KylieMinogue wrote:i constantly get 26
Change your host files.
Re: Rev6 New Login tutorial [Not a hack, No Program Req]
Posted: Sun Jul 19, 2009 9:09 am
by reLaxx`
KylieMinogue wrote:CloudStrider wrote:KylieMinogue wrote:i constantly get 26
Change your host files.
Tell me exactly what to do, since I really don't want to fuq anything up.
Re: Rev6 New Login tutorial [Not a hack, No Program Req]
Posted: Sun Jul 19, 2009 9:10 am
by KylieMinogue
By adding those line:
121.128.133.29 gwgt1.joymax.com
121.128.133.29 gwgt2.joymax.com
121.128.133.29 gwgt3.joymax.com
To the file 'C:\Windows\System32\drivers\etc\hosts'
Re: Rev6 New Login tutorial [Not a hack, No Program Req]
Posted: Sun Jul 19, 2009 9:10 am
by LaCe
29
let's wait
Re: Rev6 New Login tutorial [Not a hack, No Program Req]
Posted: Sun Jul 19, 2009 9:11 am
by KylieMinogue
you, been waiting since 5 pass the hour.
Re: Rev6 New Login tutorial [Not a hack, No Program Req]
Posted: Sun Jul 19, 2009 9:14 am
by NuclearSilo
.bak file is just a backup file.
You need to choose to view hidden items option (if they are hidden).
Rename 'host smt.bak' into simply 'host'
Edit with Notepad is fine.
Since this guide is posted in public. Some gay dude is gonna tell this to the bot developpers, and then all the clientless could connect to 4 servers and we're doomed
Re: Rev6 New Login tutorial [Not a hack, No Program Req]
Posted: Sun Jul 19, 2009 9:15 am
by KylieMinogue
too late, not even sure if it works yet.
I'm going to go play plant vs zombies while waiting.
Re: Rev6 New Login tutorial [Not a hack, No Program Req]
Posted: Sun Jul 19, 2009 9:18 am
by asusi
i don't wanna get banned next ban, lol No thanks
Re: Rev6 New Login tutorial [Not a hack, No Program Req]
Posted: Sun Jul 19, 2009 9:22 am
by Kubijo
If someone only get .26 it because he's using a bot and the bot only use the first ip all the time. Silkroad legit use a different ip each time >.<
You use a crappy bot xD [Bot war start here] xD
Actually it might be better to keep it clean for the result that you guy have, if you get more than 30 min, please let me know.
If you get multiple hours to wait, on the .28 or .29 post it here.
We are waiting for that 1 person to get bad result out of this.
If you get bad result write what server and what ip 28 or 29
Could be useful for feedback and doing more test on the login server.
If someone connect on the server on .26 and can connect in least than 30 and it not right after a server restart, please inform us too here.
asusi, you do not need to modify anything on your computer or client, all you need is close silkroad and re-open it until you are on the server 28 or 29.
Re: Rev6 New Login tutorial [Not a hack, No Program Req]
Posted: Sun Jul 19, 2009 9:24 am
by KylieMinogue
i got in, 20mins
Re: Rev6 New Login tutorial [Not a hack, No Program Req]
Posted: Sun Jul 19, 2009 9:25 am
by CloudStrider
Kubijo wrote:If someone only get .26 it because he's using a bot and the bot only use the first ip all the time. Silkroad legit use a different ip each time >.<
You use a crappy bot xD [Bot war start here] xD
Actually it might be better to keep it clean for the result that you guy have, if you get more than 30 min, please let me know.
If you get multiple hours to wait, on the .28 or .29 post it here.
We are waiting for that 1 person to get bad result out of this.
If you get bad result write what server and what ip 28 or 29
Could be useful for feedback and doing more test on the login server.
If someone connect on the server on .26 and can connect in least than 30 and it not right after a server restart, please inform us too here.
asusi, you do not need to modify anything on your computer or client, all you need is close silkroad and re-open it until you are on the server 28 or 29.
OMG! LOL!
HAHAHAHAHAHA! I seriously can't believe you just owned like 4 people at once.
Re: Rev6 New Login tutorial [Not a hack, No Program Req]
Posted: Sun Jul 19, 2009 9:27 am
by reLaxx`
Got 29...starting timer now.
5:27
Re: Rev6 New Login tutorial [Not a hack, No Program Req]
Posted: Sun Jul 19, 2009 9:36 am
by fortroy
Kubijo wrote:If someone only get .26 it because he's using a bot and the bot only use the first ip all the time. Silkroad legit use a different ip each time >.<
You use a crappy bot xD [Bot war start here] xD
Actually it might be better to keep it clean for the result that you guy have, if you get more than 30 min, please let me know.
If you get multiple hours to wait, on the .28 or .29 post it here.
We are waiting for that 1 person to get bad result out of this.
If you get bad result write what server and what ip 28 or 29
Could be useful for feedback and doing more test on the login server.
If someone connect on the server on .26 and can connect in least than 30 and it not right after a server restart, please inform us too here.
asusi, you do not need to modify anything on your computer or client, all you need is close silkroad and re-open it until you are on the server 28 or 29.
LOL OMG!!!
ownage XD
Re: Rev6 New Login tutorial [Not a hack, No Program Req]
Posted: Sun Jul 19, 2009 9:37 am
by NuclearSilo
You botters won't have this privilege! Live with your goldbots! Bitches!
