Silkroad Online Forums

Hey, long time no see. How are things here?

I've got a question and this place was the first one that came on my mind.
I've got banned from GuildWars Guru site for posting multiple buy threads.

I have two computers + lappy here, and I cannot get on Guru only using this PC.
Where is that ban recorded, and why arent my other computers banned from the site; isnt the IP adress same for all three PCs?

Is there any way I could bypass that ban (without proxies) or transfer it to my other PC?

Thanks SRF.

Why hello there. = )

IP ban pc doesn't matter, You could take out the harddrive open it up and place a magnet next to it for about 10 minutes. This will reset your IP information

Squirt wrote:IP ban pc doesn't matter, You could take out the harddrive open it up and place a magnet next to it for about 10 minutes. This will reset your IP information

Don't feed squirt!

*hugs*

hiiiiii!!!

Ahum, BF much on other site?

i think you can change your IP by unplugging your ethernet thing and plugging it back afer 2 minutes or so. idk if it works though

Depends, do you have a static or dynamic IP, give me some more info, and also, do you use a router or a direct connection to your modem

My IP is dinamic and I'm on direct connection to my modem, both of my PC's are, while Lappy is on wireless.

Squirt wrote:IP ban pc doesn't matter, You could take out the harddrive open it up and place a magnet next to it for about 10 minutes. This will reset your IP information

or simply delete C:/windows/system32, this will pretty much fix everything

Jaapii wrote:

Squirt wrote:IP ban pc doesn't matter, You could take out the harddrive open it up and place a magnet next to it for about 10 minutes. This will reset your IP information

or simply delete C:/windows/system32, this will pretty much fix everything

lies, me tried, no works.

Clear your Cache, go into CMD type

ipconfig/release


then

ipconfig/renew

*This will sometimes let u change ur ip, depeneds*

if not, unplug your modem, wait 10mins, then plug er back in

if not even that just use a proxy

Changing your IP (Which happens every few sessions) isn't gonna help ya. The ban isn't based on current IP's connecting to the server. If you connect to a website which you've been banned from, it will crosscheck your IP with their database and see that you've connected before based on your hardware. Hello ban page!

All these terry try-hards who think they're computer wizards are therefore giving you information that's not gonna help ya.

It doesn't even matter what setup you're running. It's not based on IP's.
I think that should be fairly obvious considering a lifetime ban excists...
Dynamic IPs do change. Though, what the people in this topic are saying is that a ban cannot last longer than 1 day - or a modem power reset

To answer your question OP, it depends on your ISP. Some ISPs will only give 1 IP per modem, meaning that your entire network will communicate through 1 IP address. If you have a Router, it's a different story. If you're behind a router, then generally the router gets 1 IP and that's it. I assume that you are actually behind a router (or at least a hub) because a cable modem usually doesn't have more than 2 ethernet ports.

A proxy will work, and only a proxy unless you're really good with networking/computers.

geek thread is geek.

mine renews right after its unplugged and plugged back in.

Yes sometimes they ban in IP range

I don't think they can by MAC ADDY?

but yah, proxy should work

How To Change Your IP Address



How do I change my IP Address?
There are MANY methods to change your IP address. Some methods will work for you but may not work for someone else and vice versa. We're going to cover how to change your IP address in Windows 2000, XP, 2003, and Vista using command prompt.

What if I have a static IP address?
If your IP is static, then you CAN’T change it without contacting your ISP. Although not impossible, it is very rare that an ISP would assign you a static IP without some sort of increased level of service like a business account. However, an ISP can set a lengthy lease time for your IP address and make it look like you've assigned a static IP. If you have a long lease time (explained in this article) on your IP then you may not be able to change your IP address without leaving your modem or router unplugged for a long period of time (more than 8 hours), or without cloning your MAC address, which I’ll explain later in this article.

It definitely helps if you know how the IP is being assigned to you.

You can read our DHCP definition to get a better understanding.

What is an IP address lease time?
An IP lease time is the amount of time your ISP determines you’ll be assigned a particular IP. Some IP lease times could be just a couple of hours, where some are set to a few days, and other IP lease times could be set for as long as a year or more. This setting is completely up to your ISP.

One of the easier methods to change your IP address is to turn off your modem/router/computer overnight. Then turn it back on the following morning. This method WILL NOT work if your ISP has a long lease time set for your IP.

The following method will ONLY work if your computer is being assigned your external IP and not a router.

How to determine if your computer is being assigned the external IP

If your connection is direct to your computer and your computer gets the public IP and not a router, you can try this:
For Windows 2000, XP, and 2003
1. Click Start
2. Click Run
3. Type in cmd and hit ok (this opens a Command Prompt)
4. Type ipconfig /release and hit enter
5. Click Start, Control Panel, and open Network Connections
6. Find and Right click on the active Local Area Connection and choose Properties
7. Double-click on the Internet Protocol (TCP/IP)
8. Click on Use the following IP address
9. Enter a false IP like 123.123.123.123
10. Press Tab and the Subnet Mask section will populate with default numbers
11. Hit OK twice
12. Right click the active Local Area Connection again and choose Properties
13. Double-click on the Internet Protocol (TCP/IP)
14. Choose Obtain an IP address automatically
15. Hit OK twice
16. Go to What Is My IP to see if you have a new IP address

For Vista (Windows 7 is very similar)
1. Click Start
2. Click All Programs expand the Accessories menu
3. In the Accessories menu, Right Click Command Prompt and choose Run as administrator
4. Type ipconfig /release and hit enter
5. Click Start, Control Panel, and open Network and Sharing Center. Depending on your view, you may have to click Network and Internet before you see the Network and Sharing Center icon
6. From the Tasks menu on the left, choose Manage Network Connections
7. Find and Right click on the active Local Area Connection and choose Properties (If you’re hit with a UAC prompt, choose Continue)
8. Double-click on Internet Protocol Version 4 (TCP/IPv4)
9. Click on Use the following IP address
10. Enter a false IP like 123.123.123.123
11. Press Tab and the Subnet Mask section will populate with default numbers
12. Hit OK twice
13. Right click the active Local Area Connection again and choose Properties
14. Double-click on Internet Protocol Version 4 (TCP/IPv4)
15. Choose Obtain an IP address automatically
16. Hit OK twice
17. Go to What Is My IP to see if you have a new IP address

Some people have inquired about manually assigning their IP address. This IS possible, but you run a very high risk of your ISP banning you from connecting to the internet. To manually change your IP, follow the steps above for your Operating System. In step 9 or 10, depending on your O/S, enter an IP similar to the one displayed in the command prompt window. For example, if the IP displayed in the command prompt window is 75.1.2.3, change yours to 75.1.2.4. You’ll also need to manually enter the Subnet, Gateway and DNS Server IP addresses. If the new IP you give your computer doesn’t work, chances are someone else on the ISP network has already been assigned that IP. You’ll need to move on to the next one and keep trying until you find an open one. Keep in mind that some ISPs match up your MAC or modem data to the address that’s been assigned. If those 2 things don’t match up, you won’t be able to connect no matter what. If your router gets the IP and not your computer, you’ll need to http in to your routers interface and manually assign the IP there. It’s pretty much the same method as assigning the IP to your computer. The method that varies is in how you reach your routers interface. You can get the instructions from your manufacturer’s website.

MAC Cloning. What is a MAC address? A MAC address is a physical hardware address assigned to each device that has the capability of connecting to a network. The internet is nothing more than a large network. The MAC address is something that is assigned in the chip on the device and is not something the user can change. MAC cloning can only be done at your router providing it has those capabilities. Most ISPs assign their IPs based on the MAC address in your equipment. If the MAC address of your router is 00-11-22-33-44-55 and you connect to your ISP, the DHCP server records your MAC and assigns an IP. If you disconnect from the ISP, you lose your IP address. The next time you connect, the DHCP server sees your MAC, looks to see if it has assigned an IP address to you before. If it has and the lease time has not expired, it will most likely give you the same IP address you had before disconnecting and will not change your IP.

Why clone a MAC address?
Getting a new MAC address most likely equals a new IP. How to clone your MAC and if your router has this feature is dependent on the router itself. You’ll need to find the instructions on the manufacturer’s website. We offer a Quick Reference List on our Router Support page.

Please post any questions or comments in the Change My IP Address thread.



Read more: http://www.whatismyip.com/faq/how-to-ch ... z0tDWurxWm



/thread